Occasion Stapler
A magazine stapling machine has a place where multiple preformed staples are stored ready for use.
For many years, some stapler models had knobs on top, and in many cases the operator was required to hit the knob with his/her hand to insert and clinch a staple. For some models, rubber caps for the knobs were available to protect hands. Other stapler models used levers, which were pressed rather than hit. Some advertisements for staplers, including some with knobs, stated as a benefit that 'no pounding' was required.
In 1878, William J. Brown, Jr., received US Patent No. 210,748 for a rod, made from wood or other material, on which a number of individual staples that were not connected to each other could be mounted and encircled by a wire to hold them in place. When a user wanted to load the staples into a magazine stapler, the encircling wire was removed and the staples were pushed off this rod into the stapler's magazine. Until the mid-1920s, this was the way staples were sold for magazine staplers. However, this was about to change.
Insert patent image and catalog image.
A Bostitch company history states that the Boston Wire Stitcher Co. (later known as Bostitch) introduced the first 'cemented strip staples' in 1924 (bostitch.com, 11/1/2015). We have not found evidence to support the claim regarding the introduction in 1924. However, on Oct. 1, 1925, an inventor affiliated with the Boston Wire Stitcher Co. applied for a patent for strips of staples formed in the following way: first, a strip of tissue paper was attached to the underside of a row of staples; second, an adhesive was sprayed onto the staples, 'cementing' them together. When the cemented strips of staples were inserted into a stapler, the tissue was still attached. The tissue was destroyed as the staples were used to fasten papers. We have not found an advertisement for or an example of this type of staple strip. US Patent No. 1,665,051 was awarded in 1928.
A 1927 ad for the “New Model Hotchkiss Wire Stapling Machine” stated that “while each staple is a unit and already formed, the whole string of 250 is ‘frozen’ or soft-leaded together.” These 1927 Hotchkiss frozen wire staples were sold on a strip of metal with a wire over the top of the staples. Hotchkiss was still selling this type of staple stick in 1930.
By contrast, a 1928 advertising image shows sticks of staples that were soft-soldered together for use in Neva-Clog staplers, and these sticks were not on rods encircled by wires. The sticks appear identical to the sticks of staples sold for staplers today. The same was true for the Hotchkiss staple sticks sold in the box below, which may date from the 1930s.
Hotchkiss 'Soft Leaded' Frozen Wire Staples
In 1929, an inventor affiliated with Bostitch applied for a patent for strips of individual preformed staples held together solely with glue and no longer mounted on a rod. US Patent No. 1,792,235 was issued in 1931. The patent application stated: 'It has before been proposed to assemble staples in stick form by attaching them together with solder [or] by pasting a strip or strips of paper along their top and sides. None of these methods has been satisfactory.' The application also stated that an object of its invention was 'to provide a staple stick or refill package in which the staples are held together without the use of a central core or support and without an outer wrapper or extraneous binder.' The application further stated that 'I have devised a method of bonding or fastening the staples together in a unit or stick by applying a coating of adhesive to their under and inner sides which will not interfere with the operation of the stapling machine.' Staples that were “glued” together were marketed until at least 1936 as “Cohered” or “Frozen” wire staples.
Glued Frozen Wire Staples
Model, Year Introduced, Maker | Click Image to Enlarge |
Brown Office Pet Paper Binder Patented 1879 ~ On market 1880 ~ Advertised 1881 William J. Brown, Jr. Philadelphia, PA The machine in the photo is a slightly modified version of the machine in the 1881 advertising illustration. | |
No. 5 Breech Loader Stapling Machine Patented 1887 by William J. Brown, Jr., Philadelphia, PA ~ Advertised 1886-1902, 1910, 1922 Advertised by the Wire Staple Co., Philadelpia, PA, in 1886. This was the name of Brown's company during at least 1885-89. Product reviews published during 1899-1900 identified Samuel J. Yarger, Philadelphia, PA, as the supplier of this machine, and small oval brass plates on some examples of this machine have Yarger's name. Yarger manufactured a wide range of wire stitching and binding machines used by printers during the decade beginning in 1899. Brown changed his company's name to Acme Staple Co., Ltd., in 1894. This machine was advertised as the Acme No. 4 in 1910. Yarger and Acme were different manufacturing companies. Advertisement for No. 5, 1889. This image, which corresponds to that in the 1887 patent, appeared in ads during 1886-92. There are minor differences between the machine in the image above and the machine in the photos to the right, e.g., the image above shows a row of holes along the spine of the machine. Those holes no longer appear in the image used in ads from 1893 onward. There is a distinct No. 6 model. | (35018 bytes)' width='100' height='78'> After one places staples on the rail that that is visible, in part behind and in part below the rubber band, one reinserts a sheet metal part and attaches a rubber band a hook on that part and a hook on the machine to put forward pressure on the staples in the magazine. |
McGill Magazine Staple Press Advertised 1887-89 Holmes, Booth & Haydens New York, NY | |
Office Pet No. 2 Paper Fastener Patented 1895 ~ Advertised 1895 Acme Staple Co., Ltd. Philadelphia, PA | Picture coming |
Sure Shot Paper Fastener Patented 1894-95 ~ Advertised 1898-1937 Acme Staple Co., Ltd. Philadelphia, PA (1894-1909) & Camden, NJ (1909 onward) There were two models, one with a convex back and the other with a concave portion along the back. Illustrated ads during 1898-1920 show the first of these. Each model was available Japanned (black) or with nickel plating. | |
Acme No. 1 Staple Binder Advertised 1898-1950, likely sold after 1950 Acme Staple Co., Ltd. Philadelphia, PA (1894-1909) & Camden, NJ (1909 onward) | |
Midget Stapler (first model) Advertised 1901-28 Acme Staple Co., Ltd. Philadelphia, PA (1894-1909) & Camden, NJ (1909 onward) A second model of the Midget (not shown here) was a slight variation on the first model. The second model had an anvil with a sloped front. It was advertised 1925-36. A third model (shown later in the present table) was advertised 1936-50. | |
Simplex Stapler Advertised 1903-31 Acme Staple Co., Ltd. Philadelphia, PA (1894-1909) & Camden, NJ (1909 onward) Later, Acme marketed a Simplex Stapler that was identical to the third model of the Midget Stapler (shown farther down in the present table). | |
Yarger No. 4 Staple Driver Patented 1903 ~ Advertised 1906-22 S. J. Yarger, Philadelphia, PA | |
Acme No. 2 Stapler Introduced 1908 ~ Advertised 1908-50 Acme Staple Co., Ltd. Philadelphia, PA (1894-1909) & Camden, NJ (1909 onward) | |
Illico Stapling Machine Advertised in Belgium c. 1910 Similar machines were advertised in the U.K. in the 1920s and patented in Germany 1929 and France 1937 Etabts O. Jansoone Roubaix, France | |
Boston Automatic Stapling Machine Patented 1914 ~ Advertised 1923 Boston Wire Stitcher Co. East Greenwich, RI The nameplate on some machines shows a 1907 patent date, on others a 1914 patent date. The 1907 patent relates only to a feature that appeared originally on a large foot-powered machine. According to a company history on bostitch.com, the machine pictured to the right was introduced in 1914 and was referred to as the Model AO. | |
McGill's Lever Staple Press No. 75 Advertised 1920s U.K. Courtesy of Curtis Scaglione | |
McGill's Automatic Paper Fastener No. 12 Advertised 1920s U.K. Courtesy of Curtis Scaglione | |
McGill's Self-Feeding Staple Press No. 4 Advertised 1920s U.K. Courtesy of Curtis Scaglione | |
Bostitch B1 & B3 Staplers Several Patent Applications 1922-34 ~ Several Patents Issued 1924-38 Boston Wire Stitcher Co. East Greenwich, RI, and Portland, ME A 1924 description indicated that the 'magazine holds 210 staples' and that the machine 'fastens 2 to 50 sheets.' The company began using the brand name 'Bostitch' in marketing its staplers on Nov. 23, 1919, and obtained US Trademark No. 131,065 for this name in 1920. A government document from 1923 refers to a purchase of Bostitch staplers. These may have been early B1's.In any event, government documents from 1924 refer to purchases of Bostitch staplers for $3.75 each. Presumably these were B1's. Some early B1's have the 1924 patent date and an indication that other patents were pending. These B1's may date from 1924-1926. The stapler to the right is slightly later. It has patent dates 1924-26. | |
Speed Fastener 3 in 1 Stapler (a.k.a. Speed Fastener No. 50 and No. 100, Skrema Stitching Machine) Patented 1924 (Germany) ~ Advertised 1925-28 (US) Skrebba Works, Freiburg, Germany Parrot Speed Fastener Corp., New York, NY (US Distributor) Parrot Speed Fastener Corp. was incorporated in 1925. Initially it imported staplers from Germany. It began manufacturing them in the US in 1931. The company name became Speed Products in 1939 and then Swingline in 1956. (Chronology from Swingline.com, Nov. 21, 2013.) However, Speed Products was using 'Swingline' as the brand name for its staplers and staples at least as early as 1946. | |
Hotchkiss Wire-Stapling Machine (a.k.a. Model 1A) Introduced 1925 ~ Advertised 1925-30 E. H. Hotchkiss Co., Norwalk, CT | Picture coming |
Floris Stapler Patented 1926 (Austria) ~ Advertised 1934 (Germany) Austria or Germany | |
Babe Stapler (early model, top photo) Introduced in U.S. 1928 ~ Advertised 1931 ~ Similar staplers were advertised in 1936 in Germany Made in Germany Parrot Speed Fastener Corp., New York, NY (US distributor) A similar machine was advertised in 1929 as the Parrot No. 100. Babe Stapler (late model, bottom photo) Patent Application 1934 ~ US Patent No. 2,096,573 Issued 1937 Advertised 1936 Parrot Speed Fastener Corp., New York, NY (manufacturer) The Curator has staples for a Babe, probably the late model but not sure, available for sale. | |
Junior Stapler Introduced and Advertised 1928 Acme Staple Co., Ltd. Camden, NJ | |
Hotchkiss 2A Stapler Introduced 1928 ~ Advertised 1928-36 E. H. Hotchkiss Co., Norwalk, CT | |
Hotchkiss 1A (left) & 3A-54 Staplers 1929 (left) & c. 1933 1A Advertised 1930. 3A Advertised 1936. E. H. Hotchkiss Co., Norwalk, CT The Hotchkiss 1A shown here was introduced in 1929. It replaced the similar but lighter weight Hotchkiss Wire Stapling Machine (a.k.a. 1A) that was introduced in 1926. A Star Wire Stapler identical to the 1929 Hotchkiss 1A was sold by The Star Paper Fastener Co., Norwalk, CT. Star seems to have been a company and brand name used by E. H. Hotchkiss Co. In 1931, the “New, Improved” Hotchkiss Model 1A wire stapling machine came with an anvil with two positions. In one position, both legs were bent inward to form a normal staple. In the second position, one leg was bent inward and the other was bent outward, so the ends of the legs pointed in the same direction. The second position was designed to insert a temporary staple that could easily be removed. The Hotchkiss 5A (not shown here) was advertised in 1936. | |
Kling-Tite Stapler Patented 1933-34 (US Patent Nos. 1,919,373; 1,927,274; 1,978,983) A. L. Hansen Mfg. Co. Gurnee, IL | |
Ace Stapler Model No. 102 On market 1934-35 ~ Advertised 1936-74 Ace Fastener Corp. Chicago, IL In 1939, the Ace No. 102, at that point also called the Ace Standard Office Model, came with a two-position anvil. See bottom image to right (where the anvil is clearer than in the top photo). In one position, the legs were turned inward when the staple was clinched. In the other position, the legs were turned outward to make a temporary staple that could easily be pulled out as though it were a pin. | |
Cadet Stapler Model No. 302 Advertised 1936-50 Ace Fastener Corp. Chicago, IL Cadet design changed by 1974, when it was a short version of the Aceliner. The similar but longer Pilot Stapler Model No. 402 was advertised in 1936-74 and is still produced. The larger No. 104 Duplex Fastener was advertised in 1936. | |
Neva-Clog Stapler Model D-30 Advertised 1936-40 Neva-Clog Products Bridgeport, CT In 1936, Neva-Clog D-30 and D-40 staplers came with an anvil with two positions. In the first position, the legs were bent inward. In the second position each leg was bent outward to make a temporary staple. The straight staple could be pulled out in the same way as a straight pin. The Neva-Clog staplers could also be opened 180 degrees and used as tackers (without an anvil). | |
Midget Stapler (third model) Advertised 1936-50 Acme Staple Co., Ltd., Camden, NJ Acme marketed a Simplex Stapler identical to this third version of the Midget. | |
Aristocrat Stapler No. H-31 Advertised 1937 E. H. Hotchkiss Co. Norwalk, CT | |
Speed Stapler No. 3 and No. 4 Patent Applications 1937 ~ Patents Issued 1938 (Design Nos. 110,796 to 800), 1941 (No. 2,267,719), 1946 (No. 2,424,649) No. 3: On market 1938 ~ Advertised 1939-57 No. 4: Advertised 1939-61 Parrot Speed Fastener Corp. (until 1939), Speed Products Co. (1939-56), Swingline Inc. (1956 onward) Long Island City, NYC Speed Products Co. used 'Swingline' as the brand name for its staplers and staples at least as early at 1946. The Speed Stapler introduced an important innovation that made the loading of staples faster. Previously, to load a magazine stapler, one had to remove a plunger (or other mechanism to push staples forward) from the back of a stapler, insert a staple stick onto a rail at the back of the machine, and then replace the plunger. By contrast, one simply opened the Speed Stapler (see the second photo to the right), placed a staple stick on the rail, and closed the stapler. When the Speed Stapler was opened, the mechanism that pushed staples forward as they were used moved back out of the way; when the stapler was closed, that mechanism moved forward against the staple stick. This innovation gave the company an important marketing edge over competitors. These staplers had a variety of exterior finishes. Immediately before and after World War II, they had nickel-plated bodies like the Swingline No.4 in the bottom photo. At other times, they were black, like the staplers in the first and third photos to the right. During 1957 they were grey (like the stapler in the second photo to the right), pearl, jade, or topaz. Model 3C had a wood base and presumably was marketed, at least initially,during WWII to save metal. The Model 3C in the third photo was produced by Speed Products Co., and therefore dates from 1939-56. Generally the No. 3 and No. 4 had two-position anvils (like the Neva-Clog D-30), but the 3-C had a one-position anvil. | No. 3 Black Swingline No. 3 Grey open Speed Products No. 3C with wood base Swingline No.4 with nickel-plated body |
Scout Stapler Model No. 202 Patent Applications 1930-34 ~ Patented Issued 1936-38 (Nos. 2,033,018, 2,059,021, 2,066,157, 2,103,551, 2,107,169) ~ Version with concave spine (top photo) advertised 1939 ~ ~ Version with convex spine (bottom photo) advertised 1939-74 ~ Ace Fastener Corp. Chicago, IL Some surviving Scouts with convex spines have colored metallic exteriors. Scouts require special undulated chisel point staples, which are still available as Ace Clipper 70001 Staples from Shoplet.com | |
Electric Magazine Stapling Machines & a Manual Cartridge Stapler | . |
Bostitch Electromagnetic Fastener (a.k.a. Bostitch Model 4) | 1937 patent drawing Photo of Bostitch Model 4 to be added. |
Staplex Electric Stapler Staplex has marketed electric stapling machines since 1949. Models S54 and S56 were marketed in 1950. Model SJM was advertised in 1974. Staplex Co., Brooklyn, NY Uses standard staples. | |
Swingline Electric Stapler Model 66 Patented 1959-60 ~ Advertised 1959-61, 1974 Swingline Inc. Long Island City, NY Swingline marketed an electric stapling machine in 1957. | |
Bates Electric Stapler 56 Advertised 1957-74 The Bates Mfg. Co., Orange, NJ The Bates 56 electric stapler contains a removable Bates 56 manual stapler that uses strips of 210 standard staples. | |
Swingline Electronic Stapler Model 68 Advertised 1974 Swingline Inc. Long Island City, NY This stapler used a coil with 10,000 staples. In the coil, the wire for each staple was straight and wires were side-by-side. The wires were bent into staples inside the machine, then inserted and clinched. | |
Swingline 790 Manual Cartridge Stapler Applications for patents 1981-85 ~ Application for patent for cartridge 1983 ~ Marketed at most briefly c. 1983 Swingline Inc. Long Island City, NY This stapler used a coil like the one used by the Model 68 above, but with 5,000 staples. The same coil is used by the Swingline Zephyr electric stapler, which was introduced in 1983. We have a duplicate of this stapler, loaded with a full coil of staples, mint in box with instructions, available for sale. Click on the Curator button at the top of our home page to send us an email if you are interested. |
Glitter Desk Stapler, Office Supplies, Teacher Gifts, (Your Choice of Color), Red Stapler, Silver Stapler, Purple Stapler, Pink Stapler MaegensGlitzandGlam. From shop MaegensGlitzandGlam. 5 out of 5 stars. Vintage Stapler Collection - Tot Speed Stapler - Swingline 400 - Swingline Cub IfindUbuy. From shop IfindUbuy. 5 out of 5 stars (463) 463 reviews $ 28.00. Favorite Add to 13pc or 5pc Secretary /. Stapler and Staple Standard size 26/6 16 sheet Full Strip with 5000 Staple 5 out of 5 stars (5) 5 product ratings - Stapler and Staple Standard size 26/6 16 sheet Full Strip with 5000 Staple. Uline stocks a wide selection of heavy duty industrial staplers and staple guns. Order by 6 pm for same day shipping. Over 37,500 products in stock. 12 locations for fast delivery of Bostitch staplers. Electric staplers use sensors to sense when paper has been entered into the stapling section and the motor automatically powers the unit to staple up to 20 sheets, 45 sheets or more at a time. Choose an electric stapler with a stack-height gauge and staple placement guides to ensure precise, accurate stapling every time.
Swingline closed its US stapler production facilities in 1999 and sells imported staplers.
Cart0ProductProducts(empty)Occasion Stapler For Vinyl
Occasion Starting With J
No products
Occasion Stapler Ameise
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Occasion Stapler Still
- Staples
19 gauge, ½' crown, 1/4' - 9/16' leg
16 gauge, ½' crown, 3/8' - 9/16' leg
16 gauge, 11mm crown, 11mm leg
- Finish Nails
14 & 15 gauge, ½' - 2-1/4' length
- Brads & Pins
18 gauge brads, 7/16' - 1' length
18 gauge pins, 7/16' - 1' length
16 gauge pins, 7/16' - 3/4' length
- Common Nails
5 penny Coil 0°, 1-5/8' length
5 penny Coil 15°, 1-5/8' length
8 penny Coil 15°, 2-1/4' length
5 penny Bulk, 1-5/8' length
8 penny Bulk, 2-1/4' length
- Clamp Nails
Clamp nails, ½' - 4' length
- MISC Fasteners
Double pointed nail, 1 - 1.2' length
Snap studs
Spike, 6' length
- Cap Stapling
Cap Staple Gun
Staples
Caps
- Staple Guns
Omer® pneumatic staple guns
Hammer tackers
Compression tackers
- Nail Guns
Omer® pneumatic nail guns
Omer® pneumatic pin guns
Omer® pneumatic brad guns
- Portable Power
Liquid CO2 Canister